Model Number: NT-EN1400-M#1-#0234
Brand Name: N-net
Key Specifications/Special Features:
Device for Ethernet transmission over coax featuring coax to UTP connectivity, equipped with one Ethernet port and four BNC ports, which can make a ring or aggregationSo it can be used in pair or one to multipleThe equipment can transmit signal over all kinds of common cables such as telephone line, Ethernet cable, UTPWith excellent isolation, thunder prevention and anti-jamming functionIn the practical project, this device is proved to be of high performance in surge prevention
It transmits IP video or Ethernet up to 1.5km at a max rate 70Mbps over existing coax, thus cut the cost by avoid re-cabling when swapping analog cameras for IP/Megapixel models
NT-EN1400-AT (AF) series is POE version of model NT-EN1400, it can supply power over Ethernet cable for PD devices like HD cameras, wireless AP, IP telephone equipment
Our EOC support IEEE802.3af (15.4W) and IEEE802.3at (25.5W) standard
NT-EN1400-AT (AF) series also supports POC (Power over Coax) function. Model at local side (namely the master) can supply power over coax cable for the model at remote side (the slave) and IP cameras.
Modulation frequency: 2 MHz-28 MHz
Modulation method: OFDM
Encryption: AES128-bit encryption
Networking: One Master and 7 Slaves
Protocol：IEEE802.3/u 10Base-T, 100Base-TX, IEEE802.1Q VLAN, IEEE802.3af/at
Support Auto-sensation of MDI/ MDIX at Ethernet port, compatible with NIC, switch and HUB
Support up to 1522Bytes data packet
Support Store and forward working mode; backpressure on Half-Duplex and flow control Full-Duplex.
Power supply range: DC 12V-56V
Operation temperature: -20-70℃
Support Ethernet ESD protection and EFT
POE (15.4W) and POE+ (25.5W) supported (optional)
| Parameter |
Specification |
| Design grade |
Commercial Grade |
| Rate |
10/100Mbps |
| Protocol |
IEEE802.3/u, 10Base-T, 100Base-TX, IEEE802.1Q VLAN, IEEE802.3af/at |
| Transmission distance |
Coax（SVY75-5）: 1.5Km(TCP/IP up to 70Mbps)
Cat 5: 100m |
| Port |
one RJ45: connected to STP/UTP cat 5
one BNC: Q9 |
| Flow control |
Duplex: flow control, Half Duplex: Backpressure |
| BER |
<10-9 |
| MTBF |
50,000 hours |
| LED indicator |
PWR- power,
LAN- link/ Act,
Coax- coax cable connection
MASTER- master device monitoring |
| Power supply |
Input range:12~56 VDC |
| Power |
<6W (when POE not working) |
| Storage humidity |
5% to 90% Non condensation |
| Working humidity |
5% to 90% Non condensation |
| Working temperature |
-20 to 70℃ |
| Storage temperature |
-40 to 85℃ |
| Dimension |
94mm×71mm×26mm |
| Weight |
0.4kg |
By certification [File Integrity]
